Raspberry Pi for BME280

BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity.  It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

Specifications:

• Supply Voltage: 1.8 - 3.3 V DC
• Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)

Operational range:

• Temperature: -40 to +85°C
• Humidity: 0-100%
• Pressure: 300-1100 hPa

Resolution:

• Temperature: 0.01°C
• Humidity: 0.008%
• Pressure: 0.18Pa

Accuracy:

• Temperature: +-1°C
• Humidity: +-3%
• Pressure: +-1Pa

I2C address

• SDO LOW ：　0x76
• SDO HIGH：　0x77

Includes

• Sensor module x 1
• 1x7 male header x 1

DataSheet : 

https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf